Heat Press Settings Lookup
Wrong temperature scorches the blank; wrong peel timing lifts the design. Pick your material for a proven starting point — temperature, time, pressure and when to peel — then fine-tune to your press and the sheet your material shipped with.
Material / transfer type
Temperature units
Starting settings — Iron-on vinyl (HTV)
Temperature
305°F
Time
10–15 s
Pressure
Medium
Let cool a few seconds, then peel.
Pre-press the blank 2–3 s to flatten and dehumidify, then press the design. These are starting pointsfor a flat home or entry-level press — always follow the sheet your specific material shipped with, and never exceed a blank’s stated max temperature. Full breakdown in our time & temperature chart.